Welcome to

Lancashire Online Knowledge

Image Credit Header image: Artwork by Professor Lubaina Himid, CBE. Photo: @Denise Swanson


3D UWB Anchor Autocalibration via MDS and Multilateration with Paired-Anchor Height Decoupling

Raspopoulos, Marios orcid iconORCID: 0000-0003-1513-6018 and Ioannou, Iacovos (2026) 3D UWB Anchor Autocalibration via MDS and Multilateration with Paired-Anchor Height Decoupling. IEEE Journal of Indoor and Seamless Positioning and Navigation .

[thumbnail of AAM]
Preview
PDF (AAM) - Accepted Version
Available under License Creative Commons Attribution.

7MB

Official URL: https://doi.org/10.1109/JISPIN.2026.3749195

Abstract

Accurate anchor positions are required for UWB indoor localization, yet manual surveying is impractical in opportunistic deployments. This paper proposes a lightweight, purely anchor-based 3D autocalibration framework for sparse multihop UWB networks requiring no mobile agents, inertial sensors, or learning components. Two algorithms are developed: an MDS-based approach using Floyd-Warshall gap-fill, Procrustes alignment and iterative pivot least-squares refinement; and a multilateration-based greedy cascade. Both are evaluated in full 3D and Semi-3D modes via a physics-based Monte Carlo simulator modelling realistic non-line-of-sight (NLOS) ranging errors. Standalone MDS and multilateration achieve approximately 1 m 3D RMSE, with height estimation identified as the dominant bottleneck. To address this, a paired-anchor deployment is introduced in which two anchors share each XY position with a fixed vertical separation. Through cross-pair ranging, a closed-form height estimator is obtained by which horizontal position error is cancelled exactly. Results indicate that 3D RMSE is reduced by up to 39% for MDS and 41% for multilateration relative to standalone baselines, reaching 0.54 m and 0.53 m at nk=7 with negligible computational overhead. The cross-pair differential estimator further provides inherent NLOS/multipath resilience typical of UWB deployments. The reported results constitute a simulation-based proof-of-concept of the paired-anchor autocalibration approach and are intended to provide a quantitative foundation for subsequent experimental validation.


Repository Staff Only: item control page